What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 02:37

But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–14 [Omar Gharbi Omar Gharbi ]
I post the exact comment here.
eight
But it can get overloaded, and no longer works.
In your opinion, who is the most overrated singer/band/artist in modern music history and why?
At least they know the answer if they wanted it.
One
He then asserts :
Why do most Indian women cuckold or cheat on their husbands?
nine
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It also is a device that limits the change in current flow.
What are some examples of unofficial acts by presidents?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What does a fuse do?
It seems Mohan does not understand the difference between a comment and an Answer.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Barnstars:
Edit 2024–10.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The third is lightning and “how it gets conducted into a home.”
AI alone cannot solve the productivity puzzle - Financial Times
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A circuit breaker is similar, but is resettable.
The other is “what does a “fuse” do?”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
What are the main issues that have historically and currently divided Republicans and Democrats?
Now when you have a certain ac resistance, then a current flows in a loop.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At one ohm, the resistor has a maximum of 1 watt power.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
but I think this circuit , shows a few more pieces.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is 'the assistant's answer'
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Have you ever accidentally seen your mother-in-law doing something that was private to her?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The Easiest Way to Lower Cortisol, According to a Longevity Expert - Vogue
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This one hit behind the barn.
Upvotes:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
There are two important concepts here.
(Dc diagram shown, AC is similar).
so, what happens?
Because the load is inductive, the current lags the voltage.(by a bit).
The bolt then partially travels down the line to your home.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
A fuse is a non-resetable over current circuit protector.
He then describes Rainy Season and Lightning.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
There are three different concepts here that are getting confused.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
the problem then depends on "how fast does the fuse operate?".
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
a photo is worth a thousand words.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
These are simplified answers to the original question, and does not change anything I wrote above.
This is where this question deviates from being a 'generic' question, and becomes more specific.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is where the MOV conducts again, and dissipated the energy.
[image of Common-mode choke]
2024–10–10[John johnson John Johnson ]
This device then solves the entire problem.
He then describes the function of a fuse.
what exactly is a ‘surge’ protector?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
For this case there are devices called Metal oxide varistors (MOV).
[old diagram got deleted by accident]
An AC voltage/ current source, and an ac inductive load.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
First Sentence:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Here is a simplified AC power diagram.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
In schematic diagrams this is the symbol for a fuse:
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
One is “what exactly is in a ‘surge protector’ ? ”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but this device (an Inductor) … impedes the rapid changes in the current.
What is lightning?